×

:

Not a valid Time
This is a required field.

PVXp™ 10 Bluetooth® 10-inch Powered Loudspeaker

$499.99
In stock
SKU
3620450
 

The PVXp™ 10 Bluetooth® features a reliable bi-amped power section that provides a total of 520 Watts of peak dynamic power with DSP based compression and limiting.

More Information
Product Available For Rent No
Brand Peavey
 

Product Description

PVXp™ 10 Bluetooth® 10-inch Powered Loudspeaker
The PVXp™ 10 Bluetooth® features a reliable bi-amped power section that provides a total of 520 Watts of peak dynamic power with DSP based compression and limiting. This enclosure features a 10" heavy-duty woofer with a 2 3/8 inch voice coil and 50 ounce magnet, and the RX10 compression driver with a 1 inch titanium diaphragm on a 100 degree horizontal x 60 degree vertical pattern asymmetrical horn. The PVXp™ 10 Bluetooth® provides two channels with a balanced input via a combination jack that accepts balanced TRS 1/4" inch input as well as a balanced XLR input. A switch is provided to change between line level gain and mic level gain. A third channel is for a Bluetooth source, or alternatively a 1/8" AUX input jack. Each channel has an adjustable Level control and a three-band EQ section. There is a balanced output, a Male XLR, that can feed the mixed signals from the three channels out to another component. A front baffle LED indicator that can be set to light when power is on, and when the "soft-limiting" DDT circuit is activated, or it can be turned off altogether. The LCD display and EQ presets, along with other DSP operating parameters are accessed via a one-knob selector.

PVXp™ Bluetooth® Series

  • Two-way bi-amped sound reinforcement enclosure
  • RX10™ compression driver, with 1 inch titanium diaphragm
  • Reliable fan-cooled power amps with DSP protection
  • Total of 520W peak dynamic power
  • DSP control for precise crossover, EQ and limiting functions
  • Bluetooth input is via a dedicated input channel
  • Mix/Thru Output is via a male XLR jack
  • Durable plastic injection-molded trapezoidal enclosure
  • Extra angled section on right side allows floor monitor use
  • Pole mount molded-in for 1 3/8" diameter poles
  • Top and bottom flying point inserts
  • 10 heavy-duty woofer with 2 3/8" voice coil & 50 oz. magnet
  • Full-coverage heavy-duty perforated steel grilles, with powder coat finish
  • DSP I/O is at 48 kHz and 24 bits, internal processing is 56 bit double-precision
  • Peavey's Quadratic Throat Waveguide technology, 100 by 60 degree coverage
  • Asymmetrical horn aims the sound down 10 degrees, at the audience, not over their heads
  • Analog input is via a combo female XLR and 1/4" TRS phone jack with balanced input
  • Three channels in total, two for analog, and one for Bluetooth or AUX input via a 1/8" jack
  • Each channel has a level control and a 3-band EQ section to adjust and shape the input signals
More Information
Product Available For Rent No
Brand Peavey
Write Your Own Review
You're reviewing:PVXp™ 10 Bluetooth® 10-inch Powered Loudspeaker