Shure SLX14/84
This Shure SLX Wireless Lavalier System includes a Shure SLX4 Diversity Receiver, a Shure WL184 Lavalier Condenser Microphone, and a Shure SLX1 Bodypack Transmitter.
Shure SLX4 Wireless Receiver
The SLX4 wireless receiver is a breeze to use with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.
Shure WL184 Supercardiod Lavalier Condenser Mic
The Shure WL184 Lavalier Condenser Mic is recommended for sound reinforcement applications that require high rejection of ambient noise and pickup angle. Shure highly recommends a windscreen, especially for outdoor events. The WL184 microphone has a 1.2 meter (4 ft.) cable terminated with a miniature 4-pin mini connector. It includes a tie clip that can be rotated in 90-degree intervals for placement flexibility.
Shure SLX1 Bodypack Transmitter
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the Shure SLX1 transmitter is the definition of reliability. SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Features
- SLX4 Wireless Receiver:
- Automatic Frequency Selection
- Automatic Transmitter Setup
- 960 Selectable frequencies across 24MHz bandwidth
- Detachable 1/4 wave antennas
- Microprocessor-controlled diversity
- RF presence LED
- 5-segment audio meter
- Multi-function, backlit LCD
- Low battery indicator
- Frequency and power lockout
- Rugged metal chassis
- Volume control on rear of unit
- 1/2 rack design
- Furnished rack hardware
- Non-slip bumpers for use out of rack
- XLR and 1/4" outputs
- WL184 Supercardiod Lavalier Condenser Mic
- Supercardioid pickup pattern for high noise rejection and narrow pickup angle
- Pickup angle: 115-degrees
- 1.2 meter (4 ft.) cable
- Miniature 4-pin mini connector
- Includes a 90-degree rotational tie clip
- SLX1 Bodypack Transmitter
- Automatic Transmitter Setup
- Backlit LCD with timeout feature
- Frequency and power lockout
- 3-segment battery fuel gauge
- 2 AA batteries (included) provide 8 hours of continuous use
- 518 - 782 MHz operating range
- SLX4 Wireless Receiver:
- Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): —13dBV; 1/4" connector (into 3000 Ohm load): —2dBV
- Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
- XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
- Sensitivity: —105 dBm for 12 dB SINAD, typical
- Image Rejection: >70 dB, typical
- Power Requirements: 12—18 Vdc at 150 mA, supplied by external power supply
- Operating Range Under Typical Conditions: 300 ft. (100m)
- Note: Actual range depends on RF signal absorption, reflection, and interference
- Audio Frequency Response (+/— 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
- Note: Overall system frequency depends on microphone element.
- Total Harmonic Distortion (ref. +/— 38 kHz deviation, 1 kHz tone): 0.5%, typical
- Dynamic Range: >100 dB A-weighted
- Operating Temperature Range: —18 degree C (0 degree F) to +50 degree C (+122 degree F)
- Note: battery characteristics may limit this range
- Dimensions (H x W x D): 1.65 x 7.76 x 5.28 in., (42 x 197 x 134 mm)
- Weight: 1 lb. 13 oz. (816 g )
- Housing: Galvanized steel
- Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with
- respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
- Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC
- WL184 Supercardiod Lavalier Condenser Mic
- Type: Condenser (electret bias)
- Frequency Response: 50 to 17,000 Hz
- Output Impedance: 1800 ohms
- Sensitivity (1 Pa = 94 dB SPL): -45.5dBV/Pa
- Maximum Sound Pressure Level: 129.5dB SPL
- Output Noise (A-weighted): 28.0dB SPL
- Dynamic Range: 102.5dB
- Polarity: Positive pressure on diaphragm produces positive voltage on pins 3 and 4 relative to pin 1
- Power Requirements: Regulated nominal +5 Vdc (1.5 Vdc to 10 Vdc) provided at microphone connector pin 2 relative to pin 1 of a Shure wireless microphone transmitter
- SLX1 Bodypack Transmitter
- Audio Input Level: -10 dBV maximum at mic gain position, +10 dBV maximum at 0 dB gain position, +20 dBV maximum at -10 dB gain position
- Gain Adjustment Range: 30dB
- Input Impedance: 1 Mohms
- RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations
- Dimensions (H x W x D): 4.25 x 2.50 x 0.75 in. (108 x 64 x 19 mmD)
- Weight: 81 grams (3 oz.) without batteries
- Housing: Molded ABS case
- Power Requirements: 2 "AA" size alkaline or rechargeable batteries
- Battery Life: >8 hours (alkaline)
| SKU | SLX14/84 |
|---|---|
| Weight | 1.0000 |
| Brand | Shure |
-
-
Free Shipping
From $99.99
-
Phone Support
800-980-6073