Radial Engineering Tonebone AC Driver Compact Acoustic Instrument Preamp
UPC | 676101044818 |
---|---|
Product Available For Rent | No |
Brand | Radial Engineering |
Details
Radial Engineering Tonebone Overview
The Radial Engineering Tonebone AC Driver is a studio-quality preamp in a pedal form factor. It's designed to amplify acoustic instruments on the stage, employing a Class-A buffered circuit for pristine audio. To help you achieve the tonal profile you're looking for, a low-cut filter, a notch filter, and a level knob are all supplied, as is a 180° phase switch to bust feedback.
The footswitch mutes the pedal so you can tune quietly on stage, provided you feed your signal to a dedicated tuner by means of the dedicated 1/4" tuner output. In addition to the tuner output, a 1/4" instrument output for acoustic amplifiers is on hand, as is an XLR output with a dedicated ground-lift switch for the house PA. Heavy duty components are used throughout to ensure the pedal's durability. The pedal requires a separately-available 9 VDC power supply.
Controls at a Glance
- Notch Knob: Sets the center frequency for the notch filter, which is used to eliminate feedback
- Low Cut Knob: Variable filter that rolls off low frequencies and controls bass resonance
- Level Knob: Controls the output of both the XLR and 1/4" outputs
- Notch Q Switch: 3-position switch bypasses the notch filter or selects between regular or deep notches; this control works in conjunction with the notch-frequency knob
- 180° Phase Reverse Switch: Reduces onstage feedback by reversing the polarity of the XLR output
- Mute Switch and LED: Footswitch turns off all outputs except the tuner output, and can help with silent tuning on stage
I/O
- A 1/4" input accepts your acoustic guitar's signal, and you can route to a 1/4" output and a balanced XLR connection for the house; a 1/4" tuner output transmit dry signal regardless of the footswitch position
Durability Features
- Switches with metal outer casing are rated at over 20,000 cycles for durability
- Glass-filled nylon XLR connector with large nickel-silver pin contacts are tougher than steel
- A double-sided military spec circuit board has been employed to ensure durability, providing a full ground plane to reduce radio frequency interference
- An I-Beam 14-gauge chassis prevents the circuit board from being torqued
Radial Engineering Tonebone Specs
Audio Circuit Type | Class-A FET |
Noise Floor | -97 dBu |
Dynamic Range | +107 dBu |
Maximum Input | +10 dBu |
Input Impedance | 10 MOhms |
Output Impedance | 4.4 kOhms |
Input Connection | 1/4" TS, phone type |
Ground Lift | XLR output |
LED Indicators | Power, mute |
Output Connectors | XLR, 1/4" output, 1/4" tuner output |
Controls | Low-Cut Knob: Range of 10 to 200 Hz Notch Knob: Range of 60 Hz to 500 Hz Others: Level knob, mute footwswitch, 180° phase switch, notch filter switch |
Power | 40 mA, 9 VDC (center pin negative) |
Construction | 14-gauge steel chassis |
Finish | Durable powder coat |
Dimensions | 4.8" x 3.8 x 1.8 / 12.1 x 9.5 x 4.5 cm |
Weight | 1.4 lb / 0.6 kg |
More Information
UPC | 676101044818 |
---|---|
Product Available For Rent | No |
Brand | Radial Engineering |