×

:

Not a valid Time
This is a required field.

Peavey IPR2 7500 2-Channel Power Amp

$1,199.99
Out of stock
SKU
PEIPR7500
More Information
UPC 014367153439
Product Available For Rent No
Brand Peavey
 

Peavey 7500 Overview

The Peavey IPR2 7500 2-Channel Power Amp features an advanced design that makes it lightweight while increasing output power, reliability and thermal efficiency. This amplifier is designed with a resonant switch-mode power supply and a high-speed Class D topology that yields a high audio resolution and efficiency. Advanced technology and extensive protection circuitry allow for efficient operation under difficult loads and power conditions.

The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2Ω. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. This amp also features 2-channel independent fourth order Linkwitz-Riley crossovers and a variable-speed fan housed in a lightweight aluminum chassis. The amplifier’s high-efficiency design allows it to operate at very low temperatures without the need for massive heat sinks to cool.

  • 2-channel independent, fourth-order Linkwitz-Riley crossovers
  • DDT protection for trouble-free operation into loads as low as 2 Ω
  • IPR Class D topology
  • Detented input controls
  • Combination XLR 1/4" inputs
  • 4-pole twist lock output connectors
  • Lightweight design
  • Individual signal pass 1/4" jacks on each channel
  • LED illuminated
  • Standby, LED power present indication 

Peavey 7500 Specs

Rated Power 2ch x 2 Ω: 4,750 W 20ms repetitive burst / 3,750 W 1% THD both channels driven @ 1 kHz
2ch x 4 Ω: 2,800 W 20ms repetitive burst / 2,450 W 1% THD / 2,020 W 0.15% THD, both channels driven @ 1 kHz
2ch x 8 Ω: 1,550 W 20ms repetitive burst / 1,425 W 1% THD / 1,200 W 0.15% THD, both channels driven @ 1 kHz
RMS Power 1 x 3,850 W at 2 Ω
1 x 2,400 W at 4 Ω
1 x 1,330 W at 8 Ω
2 x 3,750 W at 2 Ω
2 x 2,022 W at 4 Ω
2 x 1,250 W at 8 Ω
Minimum Load Impedance 2 Ω (minimum)
RMS Voltage Swing 124 V (maximum)
Frequency Response 20Hz - 25kHz; +0dB, -3dB

20 Hz to 20 kHz 2ch x 2 Ω: <0.5% @ 3,280 W 20 Hz to 4 kHz, decreasing to 3,000 W @ 20 kHz, both channels driven
20 Hz to 20 kHz 2ch x 4 Ω: <0.15% @ 2,000 W 20 Hz to 20 kHz, both channels driven
20 Hz to 20 kHz 2ch x 8 Ω: <0.15% @ 1,200 W 20 Hz to 20 kHz, both channels driven
Input CMRR > - 75 dB @ 1 kHz
Voltage Gain x 40 (+32 dB)
Crossover 100 Hz switchable 2nd order high pass and 3rd low pass per channel
Crosstalk > -85 dB @ 1 kHz @ 1,000 W power @ 8 Ω
Hum and Noise > -106 dB, "A" weighted referenced to rated power @ 4 Ω
Slew Rate > 12 V / μs
Damping Factor > 200:1 @ 20 Hz to 1 kHz @ 8 Ω
Input Sensitivity 2.25 V +/- 3% for 1 kHz 4 Ω rated power, 2.195 V +/- 3% for 1 kHz 2 Ω rated power
Input Impedance 20 kΩ, balanced and 10 kΩ, unbalanced
Current Draw @ 1/8: 2,210 VA (1,440 W) @ 2 Ω, 1,550 VA (950 W) @ 4 Ω, 982 VA (560 W) @ 8 Ω
@ 1/3: 4,260 VA (3,150 W) @ 2 Ω, 3,120 VA (2,160 W) @ 4 Ω, 1,890 VA (1,200 W) @ 8 Ω
Idle Consumption 250 VA, 120 W
Cooling 3 temperature-dependent variable speed fans
Controls 2 front-panel attenuators, crossover select switch for HPF, Normal and LPF
Indicators 5 x LED indicators per channel: Active, Signal, DDT, Temperature and DC
Protection Thermal, DC, subsonic, incorrect loads, under and over voltage
Connectors Inputs: Dual combination 1/4" XLR
Outputs: 2 x 1/4" thru, 1 x 2-pin & 1 x 4-pin twist-lock connector
Construction 0.062" (0.16 cm) thick aluminum
Dimensions 3.5 x 19.0 x 17.0" (9.0 x 48.3 x 43.2 cm)
Handle: 0.6" (1.5 cm)
Weight 14.6 lb (6.6 kg) (without power cord)
 

Packaging Info

 
Package Weight 21.9 lb
Box Dimensions (LxWxH) 21.7 x 21 x 6.8"
More Information
UPC 014367153439
Product Available For Rent No
Brand Peavey
Write Your Own Review
You're reviewing:Peavey IPR2 7500 2-Channel Power Amp