ADJ WMX1 Standalone DMX Lighting Control System

Wolfmix has been designed with the performer in mind, with 37 colored silicone buttons, and a 4.3" touchscreen giving direct access to the most important FX and features.

Microphone and Line In

 

• Sync FX with the music
• Analog audio peak detection circuit
• Built in microphone with auto gain
• 3.5mm jack socket

USB Type-B

• USB powered
• Connect with WTOOLS PC/Mac app for project backup, firmware update, BPM sync with Ableton Link and OS2L

4 Possible Universes—Standard unit comes with 1 DMX universe but up to 3 additional universes are available as add-ons, which are sold via the WTOOLS app.

• Two 3-pin and two 5-pin XLR sockets
• Assign any universe to any XLR
• Sync with another Wolfmix
• Link with faders using DMX IN

• COLOR FX: Mix up to 16 colors into a Rainbow, Sparkle, or Light Fever effect. The WMX1 will apply the effects to the light’s color channels including: RGB, Amber, White, UV, or CMY. For lights without color mixing, the effects can be applied to a fixed color wheel.
• MOVE FX: Create moving patterns on scanners and moving heads. The Move FX module includes Pan, Tilt, Circle, and a sweeping Magic Carpet effect. Fan the light beams, and move the center point of a pattern to play up to the sky or down below on the stage.
• BEAM FX: Chases, waves, and heartbeat dimming effects can be created with the Beam FX module. Effects are applied to color channels, or for lights without color mixing, it is applied to the dimmer or shutter channels. Create custom patterns with the Step Sequencer.

 

• Dedicated CPU: Robust beam engine, coded low-level straight onto the silicon, unlocking the raw power of the WMX1's 220 million heartbeats per second.
• Flash Memory: 16MB of lighting fast readable NOR flash memory ensures the WMX1 never misses a beat, with changes written on-the-fly.
• Strong Construction: Powder-coated steel base with VESA mount, and reinforced steel back-plate armor the WMX1 for tough conditions.
• High End Finishing: A laser printed matt oil finish for durable, yet soft-to-touch silicon pads, backlit with color changing LEDs.
• Touch Screen: 4.3” capacitive touch display with tinted glass. Fine-tune your project with the color picker, pan/tilt grid and on-screen keyboard for naming presets.
• Push Encoders: 4 incremental push encoders with acceleration, for fine-tuning parameters whilst flying from 0-100% with a single twist.

WMX1 operates as a standalone controller without any computer required. WMX1 can also be connected to a computer's USB3 socket for some additional functionality with the WTOOLS app.

 

• Cloud Project Backup: Backup your projects onto a computer. Backups are automatically synchronized via the cloud and can be downloaded onto any WMX1, anywhere.
• Beat Sync with DJ Software: Take the BPM calculated by your music production and DJ software using Ableton Link or OS2L. WTOOLS will read the beat and pass it to the WMX1.
• 15000+ Fixture Profiles: Never be stuck without a profile. Backup fixture profiles created on the WMX1, or load any profile from the Nicolaudie SSL2 fixture library.
• 3D Visualizer: Create a 3D representation of your stage, and render your project in real-time with Easy View 2 without any DMX input interface required (add-on purchase required).

• Connect 2 Wolfmix controllers together with the 5-pin WLINK cable (available separately) and both will follow each other. This allows for up to 8 groups to be controlled side by side; or for dual control you can extend it with a standard 5-pin DMX cable. Sync a WMX1 behind the bar with another in the DJ booth, or a WMX1 onstage with another at the front of the house.
• Alternatively, the WLINK socket can be used to connect a DMX controller such as a traditional DMX faderboard, allowing DMX input channels to be mapped to group dimmers or directly to output channels. WLINK requires an add-on purchase available through the WTOOLS app.

• Rearrange fixture order to match your rig.
• Flip LED bars if they are rigged backwards.
• Fixture split function for independent control of multibar parts.
• Map any universe to any XLR to use as a DMX splitter.
• Sequence your own beam effects in real time.
• Fade between presets. Effects will play together during the fade.
• Amber, White, and UV channel control in effects.
• Auto play a cuelist of presets with fade and hold times.
• Mix and match BPM and audio sync with the different effects.
• Play effects forwards, backwards, and symmetrically.
• Create live edits to set custom channel values, such as for a mirror ball.
• See all DMX levels and update the default values for a specific channel.
• Give groups a custom name.
• Save projects directly on the controller.
• Set your moving light’s area with the Fixture Limits view.
• Create fixtures directly from the controller with the in-built Fixture Builder.
• Smoke button with timed released.
• Lock the controller with a password.
• Music sync with Ableton Link, OS2L, BPM TAP, Audio Line-In, Audio Mic.
• Starts up in under 2 seconds.