The AE3300 offers pristine audio quality, ultra-low handling noise, exacting detail and brilliant clarity. This cardioid condenser vocal microphone features the condenser element used in the legendary AT4033.

Exceptional performance for exceptional performers

Same element as the classic AT4033 studio microphone

Well-tempered polar pattern with outstanding rejection qualities

Superior anti-shock engineering ensures low handling noise and quiet performance

High-quality double-sided PCB uses surface-mount components. Extensive grounding plane and attention to best-practice grounding methods minimize electrical noise

Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity

Robust all-metal design for enduring dependability on the road

Quiet-Flex™ stand clamp provides silent, flexible microphone positioning

Integral 80 Hz HPF switch and 10 dB pad

ELEMENT Fixed-charge back plate, permanently polarized condenser

POLAR PATTERN Cardioid

FREQUENCY RESPONSE 30-18,000 Hz

LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave

OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa

IMPEDANCE 150 ohms

MAXIMUM INPUT SOUND LEVEL 147 dB SPL, 1 kHz at 1% T.H.D.; 

157 dB SPL, with 10 dB pad (nominal)

NOISE 19 dB SPL

DYNAMIC RANGE (typical) 128 dB, 1 kHz at Max SPL

SIGNAL-TO-NOISE RATIO 75 dB, 1 kHz at 1 Pa

PHANTOM POWER REQUIREMENTS 11-52V DC, 3 mA typical

SWITCHES High-pass filter; 

10 dB pad (nominal)

WEIGHT 10.6 oz (300 g)

DIMENSIONS 7.05" (179.0 mm) long, 

1.97" (50.0 mm) head diameter, 

1.30" to 0.87" (33.0 mm to 22.0 mm) tapered body diameter

OUTPUT CONNECTOR Integral 3-pin XLRM-type

ACCESSORIES FURNISHED AT8470 Quiet-Flex™ stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch

AUDIO-TECHNICA CASE STYLE T4